ÉVASER
Comment réinitialiser
Make sure you remove the Bluetooth profile on your device first before resetting
Étape 1
Make sure your S-PLAY is charged before resetting then remove them out of the case
Étape 2
Turn on your S-PLAY by holding the Power On Button for 2 seconds. They will go to pairing mode which will be indicated by the flashing white and blue LEDs.
Étape 3
Continue holding onto the S-PLAY for another 5 seconds to turn them off and hold for another 10 seconds and the LED should flash once.
Étape 4
Your device has been resetted and can now be connected to your Bluetooth enabled device.
Étape 1
Make sure your S-PLAY is charged before resetting then remove them out of the case
Étape 2
Turn on your S-PLAY by holding the Power On Button for 2 seconds. They will go to pairing mode which will be indicated by the flashing white and blue LEDs.
Étape 3
Continue holding onto the S-PLAY for another 5 seconds to turn them off and hold for another 10 seconds and the LED should flash once.
Étape 4
Your device has been resetted and can now be connected to your Bluetooth enabled device.
